Oldham gandeng, awak AL, elastis PA66
| Méja diménsi | mm | |||||||
| Modél | DL umum / D2 ukuran diaméterna jero | ΦD | L | LF | LP | F | M | Torsi tightening (nm) |
| GL-16X18 | 4-5-6-6.35-7-8 | 16 | 18 | 7.1 | 12 | 3.0 | M3 | 1.2 |
| GL-20X23 | 5-6-6.35-7-8 | 20 | 23 | 9 | 12.7 | 4.5 | M4 | 1.7 |
| GL-20X25 | 5-6-6.35-8-9-9.525-10 | 20 | 25 | 10.1 | 12.7 | 3.0 | M4 | 2.5 |
| GL-25X28 | 5-6-8-9-9.525-10-11-12-14 | 25 | 28 | 21 | 17.7 | 2.8 | M4 | 2.5 |
| GL-32X33 | 5-6-8-9-9.525-10-11-12-12.7-14-15-16 | 32 | 33 | 14 | 20 | 3.4 | M4 | 2.5 |
| GL-40X32 | 8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20 | 40 | 32 | 14 | 20.3 | 3.2 | M4 | 2.5 |
| GL-44X46 | 8-9-9.525-10-11-1212.7-14-15-16-17-18-19-20-22 | 44 | 46 | 20.7 | 18.4 | 3.5 | M5 | 5 |
| GL-50X38 | 10-12-12.7-14-15-16-17-18-19-20-22-24-25 | 50 | 38 | 16.5 | 22.35 | 3.8 | M5 | 5 |
| GL-55X57 | 10-12-12.7-14-15-16-17-18-19-20-22-24-25-28-30-32 | 55 | 57 | 26.2 | 25.8 | 7.8 | M5 | 5 |
| GL-63X47 | 14-15-16-17-18-19-20-22-24-25-28-30-32 | 63 | 47 | 21 | 25.8 | 6.0 | M6 | 8 |
| GL-70X77 | 16-17-18-19-20-22-24-25-28-30-32-25-38-40 | 70 | 77 | 37 | 25 | 13.5 | M8 | 20 |
Parameter téknis
| Parameter téknis | mm | |||||||
| Modél | torsi dipeunteun (Nm) | Éséntrisitas anu diidinan (mm) | Sudut defleksi anu diidinan (∠.) | Panyimpangan axial anu diidinan (mm) | Laju anu diidinan (RPM) | Kaku torsi statik (Nm/rad) | Momen inersia (Nm) | Beurat gandeng (g) |
| GL-16X18 | 0.7 | 0.8 | 3 | ± 0,2 | 9000 | 30 | 3.0X10-7 | 6 |
| GL-20X23 | 1.2 | 1.5 | 3 | ± 0,2 | 3100 | 60 | 1.0X10-6 | 14 |
| GL-20X25 | 1.25 | 1.2 | 3 | ± 0,2 | 7000 | 58 | 3.0X10-7 | 18 |
| GL-25X28 | 2 | 1.6 | 3 | ± 0,2 | 6000 | 130 | UKURAN 2.8X10-6 | 25 |
| GL-32X33 | 4.5 | 2 | 3 | ± 0,2 | 4800 | 270 | UKURAN 8,9 X 10-5 | 44 |
| GL-40X32 | 9 | 2.4 | 3 | ± 0,2 | 3600 | 520 | 2.1X10-5 | 81 |
| GL-44X46 | 12 | 2.8 | 3 | ± 0,2 | 3500 | 560 | UKURAN 3,8 X 10-5 | 136 |
| GL-50X38 | 19 | 2.6 | 3 | ± 0,2 | 3000 | 800 | 6.0X10-5 | 142 |
| GL-55X57 | 22 | 3.3 | 3 | ± 0,2 | 2800 | 795 | UKURAN 9,9 X 10-5 | 255 |
| GL-63X47 | 33 | 3 | 3 | ± 0,2 | 2500 | 1200 | 2.1X10-4 | 320 |
| GL-70X77 | 56 | 3.8 | 3 | ± 0,2 | 2500 | 1260 | UKURAN 3,9 X 10-4 | 445 |
Tabel babandingan dimensi processing keyway
| Diménsi diaméter aci | Diménsi machining baku tina keyway | Ukuran alur | Gambar standar ngolah keyway | |||
| dl/d2 | b | t | (bxh) |
| ||
| lebar slot | kasabaran | jero slot | kasabaran | |||
| Φ6-Φ7.9 | 2 | ± 0,0125 | 1.0 | ± 0,10 | 2X2 | |
| Φ8-Φ10 | 3 | ± 0,0150 | 1.4 | 3X3 | ||
| Φ10.1-Φ12 | 4 | 1.8 | 4X4 | |||
| Φ12.1-Φ17 | 5 | 2.3 | 5X5 | |||
| Φ17.1-Φ22 | 6 | ± 0,0180 | 2.8 | 6X6 | ||
| Φ22.1-Φ30 | 8 | 3.3 | ± 0,20 | 8X7 | ||
| Φ30.1-Φ38 | 10 | ± 0,0215 | 3.3 | 10X8 | ||
| Φ38.1-Φ44 | 12 | 3.8 | 12X8 | |||
| Φ44.1-Φ50 | 14 | 4.3 | 14X9 | |||
| Φ50.1-Φ58 | 16 | 4.4 | 16X10 | |||
| Φ58.1-Φ65 | 18 | 4.4 | 18X11 | |||
Méja dimensi outline
| Méja dimensi outline | mm | |||||||
| Modél | DL umum / D2 ukuran diaméterna jero | ΦD | L | LF | LP | F | M | Torsi tightening (nm) |
| GLC-16X29 | 4-5-6-6.35 | 16 | 29 | 12.5 | 12 | 3 | M2.5 | 0.8 |
| GLC-20X33 | 5-6-6.35-7-8 | 20 | 33 | 14.1 | 12.7 | 3.8 | M2.5 | 0.8 |
| GLC-25X39 | 5-6-6.35-8-9-9.525-10-11-12 | 25 | 39 | 16.9 | 17.7 | 3.9 | M3 | 1.2 |
| GLC-32X45 | 5-6-8-9-9.525-10-11-12-12.7-14-15-16 | 32 | 45 | 20 | 20 | 4.5 | M4 | 2.5 |
| GLC-40X50 | 8-9-9.525-10-11-12-14-15-16-17-18-19 | 40 | 50 | 23 | 20.3 | 5.5 | M5 | 5 |
| GLC-44X46 | 8-9-9.525-10-11-12-14-15-16-17-18-19-20-22 | 44 | 46 | 20.7 | 18.4 | 7 | M5 | 5 |
| GLC-50X53 | 10-11-12.7-14-15-16-17-18-19-20-22-24 | 50 | 53 | 24.2 | 22.35 | 7.5 | M6 | 8 |
| GLC-50X58 | 10-11-12.7-14-15-16-17-18-19-20-22-24 | 50 | 58 | 26.5 | 22.35 | 6.3 | M6 | 8 |
| GLC-55X57 | 10-11-12.7-14-15-16-17-18-19-20-22-24-25-28 | 55 | 57 | 26.2 | 25.8 | 6.3 | M6 | 8 |
| GLC-63X71 | 14-15-16-17-18-19-20-22-24-25-28-30-32 | 63 | 71 | 32.8 | 26.2 | 7.8 | M8 | 20 |
| GLC-70X77 | 14-15-16-17-18-19-20-22-24-25-28-30-32-35-38 | 70 | 71 | 37 | 25 | 7.7 | M8 | 20 |
Parameter téknis
| Parameter téknis | mm | ||||||||
| Modél | torsi dipeunteun (Nm) | Eccentricity diwenangkeun (mm) | Sudut defleksi anu diidinan (∠.) | Panyimpangan axial anu diidinan (mm) | Laju anu diidinan (RPM) | Kaku torsi statik (Nm/rad) | Momen inersia (Nm) | Beurat gandeng (g) | |
| GLC-16X29 | 0.7 | 0.8 | 3 | ± 0,2 | 9000 | 30 | UKURAN 3,5 X 10-7 | 12 | |
| GLC-20X33 | 1..2 | 1.2 | 3 | ± 0,2 | 7000 | 58 | UKURAN 1,5 X 10-6 | 19 | |
| GLC-25X39 | 2 | 1.6 | 3 | ± 0,2 | 6000 | 130 | 3.2X10-6 | 35 | |
| GLC-32X45 | 4.5 | 2 | 3 | ± 0,2 | 4800 | 270 | UKURAN 1,5 X 10-5 | 67 | |
| GLC40X50 | 9 | 2.4 | 3 | ± 0,2 | 3600 | 520 | 4.2X10-5 | 114 | |
| GLC-44X46 | 12 | 2.5 | 3 | ± 0,2 | 3500 | 800 | 4.5X10-5 | 140 | |
| GLC-50X53 | 19 | 2.6 | 3 | ± 0,2 | 3000 | 800 | 1.0X10-4 | 190 | |
| GLC-50X58 | 19 | 3 | 3 | ± 0,2 | 3000 | 800 | 1.1X10-4 | 215 | |
| GLC-55X57 | 25 | 3.2 | 3 | ± 0,2 | 3000 | 900 | UKURAN 1.3X10-5 | 260 | |
| GLC-63X71 | 33 | 3 | 3 | ± 0,2 | 2550 | 1200 | UKURAN 3,5 X 10-4 | 455 | |
| GLC -70X77 | 56 | 3.5 | 3 | ± 0,2 | 2500 | 1260 | 4.1X10-4 | 520 | |
Oldham gandeng tilu-sapotong gandeng aci fléksibel nu dipaké pikeun nyambungkeun nyetir na disetir shafts dina rakitan transmisi kakuatan mékanis. gandeng aci fléksibel dipaké pikeun counter nu misalignment dilawan anu lumangsung antara shafts disambungkeun tur, dina sababaraha kasus, pikeun nyerep shock. Bahan: Uubs aya dina Aluminium, awak elastis aya dina PA66.
